Choose a category
3 models available
8 models available
3 models available
2 models available
4 models available
8 models available
Wan 3.0 Prime Video
Wan 3.0's separately priced Prime tier, with the same reference controls and up to 30 seconds at 1080P.
Creative Vision
Setting, subject, action, camera. With reference images, say what each is for: “@Image1 is the character, @Image2 the set.”
Video Parameters
Priced per second — 2 seconds at 480P is 6 credits, 30 seconds at 1080P is 345.
Each step up doubles the price. Draft at 480P, finish at 1080P.
Auto follows your reference images; with none, pick a ratio.
AI audio synced to the video. Does not change the price.
Cinema Preview
Generation History0 records
Wan 3.0 Prime Video Generator
Wan 3.0 Prime is a separately priced tier of Alibaba's Wan 3.0 with the same public controls as standard: a prompt of up to 20,000 characters, up to 10 reference images addressed as @Image1 through @Image10, an optional audio reference, and 2 to 30 seconds at 480P, 720P or 1080P. Prime costs about 1.6 times as much. We have not published a controlled quality or speed benchmark, so use identical inputs when you compare the two tiers.
Keep the prompt, references, seed, length and resolution unchanged when comparing Prime with standard
What Changes With Wan 3.0 Prime Video
Prime takes exactly the same public inputs as standard Wan 3.0, so nothing about the form or workflow changes. The upstream model ID and price change: Prime costs about 1.6 times as much at the same settings. Until a controlled benchmark is available, compare the two with identical inputs instead of assuming a particular quality or speed advantage.
A Separate Tier, Tested the Same Way
Prime is a separate upstream model with the same public parameter schema as standard Wan 3.0. Keep the prompt, references, seed, duration, resolution and ratio fixed; then any output difference comes from the tier rather than a changed setup.
Up to 10 References, Each With a Role
Upload 0 to 10 images and address them in the prompt as @Image1, @Image2 and so on. A character, a product and a set each keep their look rather than being blended into one average, so a series of clips reads as one production.
Any Length From 2 to 30 Seconds
A continuous slider, billed by the second. If the shot needs eleven seconds you generate eleven and pay for eleven. Thirty seconds is long enough for a referenced character to walk in, act and leave.
480P, 720P or 1080P
Each step up roughly doubles the price for the same length: 5 seconds is 15 credits at 480P, 30 at 720P and 60 at 1080P. Six aspect ratios, from 16:9 and 9:16 to 4:3 and 3:4, at every resolution.
Native Audio, Plus an Audio Reference
A generated soundtrack is on by default and does not change the price; switch it off if you will score the clip yourself. Optionally add one mp3 or wav of up to 15 seconds as @Audio1 to set the rhythm, the music or the voice.
Failed Runs Are Refunded
Credits are held when you submit and returned automatically if the generation fails or never comes back. At Prime prices that matters: a 1080P clip that does not arrive costs you nothing.
Make It a Controlled Comparison
Iterate on standard until the casting and motion are right, then change nothing but the model. Compare both files at the same size and playback conditions before deciding whether Prime is worth the extra credits for your material.
How to Use Wan 3.0 Prime Video
The workflow below keeps the tier as the only variable. Length and resolution multiply the price, so settle the prompt and references on standard before paying for a like-for-like Prime comparison.
Upload References, in Order
JPEG, PNG or WebP up to 20MB each, up to 10 of them. The order you add them is the order the prompt refers to, so add the lead first and the set last. Skip this step entirely for a pure text-to-video run.
Cast Them, Then Describe the Shot
"@Image1 is the presenter, @Image2 is the headset she picks up, @Image3 is the studio." After the casting, write the action, the camera and the sound. Chinese and English both work, and there is room for 20,000 characters.
Create a Standard Baseline
Run the prompt and references on Wan 3.0 standard first, short and at 480P. Save the exact seed and settings. This answers whether the casting and motion read correctly before the more expensive comparison.
Run the Prime Comparison
Bring every input and setting over unchanged and switch only the model tier. Compare the outputs before increasing length or resolution. Expect a few minutes; you can leave the page and the result waits in your history for seven days.
References Are Not a First Frame
None of your uploads becomes the opening image. They are material the model draws on. If the clip has to start on a specific picture, use Wan 3.0 Prime Image to Video instead; the two cannot be combined in one run.
Wan 3.0 Prime Video
FAQ
What Prime changes, the @Image and @Audio syntax, length, resolution and credit costs for Wan 3.0 Prime video generation.
Wan is Alibaba's video generation family, and Prime is a separately priced upstream tier of its 3.0 generation. This page runs the text-and-reference-to-video mode: you supply a prompt, optional reference images and audio, a length, a resolution and an aspect ratio, and we handle generation, credit accounting and result storage. FlowVeo3 is an independent platform and is not affiliated with Alibaba.
The public inputs and controls are identical, while Prime uses a separate upstream model ID and costs about 1.6 times as much at the same settings. We have not published a controlled benchmark proving a particular quality or speed advantage. Use standard as the default; if you evaluate Prime, keep the prompt, references, seed, duration and resolution identical and judge the two outputs side by side.
Between 6 and 345 credits, set by length and resolution. The cheapest run is 2 seconds at 480P for 6 credits. Five seconds costs 15 at 480P, 30 at 720P and 60 at 1080P. A full 30 seconds is 175 credits at 720P and 345 at 1080P. Reference images and audio do not change the price. The exact cost for your settings is shown before you submit.
Uploads are numbered in the order you add them and you refer to them in the prompt as @Image1 through @Image10. Writing "@Image1 wears the jacket from @Image2" tells the model which upload governs which part of the shot. An audio reference of up to 15 seconds, mp3 or wav, is addressed as @Audio1 and sets the rhythm, music or voice of the clip.
Not in one run. This page takes reference images as material; the Wan 3.0 Prime Image to Video page takes a first frame and an optional last frame instead. If the clip must open on a specific picture, use that page. If it must feature a specific character or product without dictating the opening frame, use this one.
Yes. A native audio track is generated with the picture and is on by default at no extra cost. Turn it off if you plan to add your own music or voice in an editor. If you want the sound to follow a particular beat or voice, add an audio reference and mention @Audio1 in the prompt.
Usually a few minutes, and noticeably longer for a 30-second clip at 1080P. You can leave the page while it works; the clip appears in your history and stays available for seven days, so download anything you want to keep. If a generation fails, the held credits are returned to your balance automatically.
Compare Wan 3.0 Prime Video
Build a standard baseline, repeat it here with the same inputs, and decide from your own two outputs whether Prime earns its higher price.